Authorized Channel Distributors for

PRODUCTS

PHOENIX CONNECTORS

CONNECTORS
SMPS / POWER SUPPLIES
ETHERNET SWITCHES
PLC & IO'S
RELAYS
SURGE ARRESTOR
TOOLS
MOTOR CONTROL
MISCELLANEOUS
REFRIGERATION and A/C
HEATING
VLT® DRIVES
INDUSTRIAL AUTOMATION

IDEC

IDEC
INSTRUMENTS
SENSORS
REFRIGERATION CONTROL
PRESSURE SWITCHES
DIFFERENTIAL PRESSURE SWITCHES

CONTACT US

  • 173/175, V.K. Building, Princess Street,
    Mumbai - 400 002.
  • 022-2200 2450 / 39657380
  • 022-2203 1642
  • rudraimpex@aol.in
    salesrudraimpex@gmail.com

SUBCON PROFIBUS

Profibus Connector with Angled Version

Subcon Profibus Features & Advantages :

  • Irrespective of whether the application requires 9, 15 or 25 position Connector with one or two cable infields for point to point or RS485 bus Connections.
  • The Eight Variant for every application is available. Optimized design for PROFIBUS, CAN OPEN, MODBUS,
  • RS232, RS422, RS485 & Safety Bus with the eight cable & tools complete the comprehensive range.
  • An Idea has taken hold absolutely no soldering or Crimping tools. The Sub-D Connectors, Subcon can be connected fast & conveniently in field Condition.
  • The Profibus Connector is designed for applications with a speed of upto 12mbps.
  • Angled or Axial cable entry.
  • With or without programming interface.
  • Terminating Resistor is already integrated.
  • Profibus Repeater upto 12mbps
Profibus Connector with Programming port
Profibus Connector with Axial version PROFIBUS REPEATET BLOCK DIAGRAM
Profibus Repeater Upto 12mbps  
PROFIBUS CONNECTOR WITH SURGE PROTECTION

Profibus Connector with Surge Arrester Features & Advantages :

  • Phoenix Contact for the first time announces the advent of DATA TRAB form the range of TRABTECH to counter Surges in a compact PROFIBUS connector.
  • This Connector provides professional Surge protection in a height of just 35mm.
  • It is not necessary to install an extra protective device.
  • The Profibus Connector is designed for applications with a speed of up to 12 mbps. The Profibus cable is connected in the protective plug using screw terminal blocks.
  • Nominal discharge Surge Current in (8/20) µs (Core to Core).
  • Output Vtg. Limitation at 1KV/µs (Core to Core).
  • Connection type OUT D-9 SUB
  • The termination resistor can be connected using a slide-type switch on the upper side of the housing, making termination quite simple.
  • With DATATRAB D-UFB-PB you have fast & professional protection against surge voltages for your application.